论文部分内容阅读
Q3110型抛丸清理滚筒具有生作效率高、动力消耗少、劳动强度低、清理质量好等优点。目前它已成为中小型铸造厂的铸造车间和小型铸造工厂铸件表面清理的主要设备。但是,Q3110型抛丸清理滚筒和其他抛丸清理设备一样,也同时存在以下缺点:(1)对某些形状复杂的铸件,特别是内腔形状复杂的铸件,清理不彻底;(2)抛丸清理设备上的磨损零件使用寿命较短,维护和修理工作量大。此外,在Q3110型抛丸清理滚筒使用说明中还规定:每次装机容量为300kg,工件最大重量为15kg,个别件只允许到30kg。所以在生产使
Q3110 type shot blasting cleaning drum has the advantages of high production efficiency, less power consumption, low labor intensity, good cleaning quality and so on. It has now become the primary equipment for surface cleaning of foundry foundries in small and medium foundries and small foundries. However, the Q3110 shot blasting cleaning drum, like other shot blasting equipment, has the following disadvantages at the same time: (1) incomplete cleaning of some complicated shaped castings, particularly those with complicated cavity shapes; (2) The wear parts on pill cleaning equipment have a short service life and a large amount of maintenance and repair work. In addition, in Q3110 shot blasting cleaning drum instructions also states: each time the installed capacity of 300kg, the maximum weight of the workpiece 15kg, individual pieces only allow 30kg. So in the production of