论文部分内容阅读
第一節電路的配置 導体的連接形式有二:一是串联,另一是并联。串联導体的電阻如下連接:第一槽末端導体接連第二槽首端導体;第二槽導体的末端接第三槽導体的首端,其餘類推。槽內不設陰極(始極板),以阳極粗銅之一面為陽極,另一面則為陰極,前面溶解,後面沉積,卽為電銅。当導体串联時,全電路的電阻等於電路上各個電阻的總和,總的電位降是各個電位降的總和,電流在電路中各點均相等,其連
The first section of the circuit configuration There are two forms of conductor connection: one is in series, the other is in parallel. The resistance of the series conductor is connected as follows: the end of the first slot end conductor is connected to the first end conductor of the second slot; the end of the second slot conductor is connected to the head end of the third slot conductor, and so on. The tank does not have a cathode (the original plate), one of the anode blister for the anode, the other side is the cathode, the front of the dissolution, the back deposition, 卽 for the copper. When the conductors are connected in series, the resistance of the full circuit is equal to the sum of the individual resistances on the circuit. The total potential drop is the sum of the individual potential drops. The current is equal at all points in the circuit.