论文部分内容阅读
1.发动机气缸壁温度测定的目的热力机与其他发动机不同,一方面是其部件温度高,另外温度分布又不均匀,因此很容易引起热变形、龟裂、漏气、机油消耗增大、胶结、烧接、油质恶化、不正常燃烧等,此外水温、油温必须保持在适当值范围内。如果上述问题超过一定限度,则发动机将发生故障。因此在设计发动机时,当然要根据经验和计算
The purpose of the engine cylinder wall temperature measurement Thermodynamic engine and other engines different, on the one hand, its high temperature components, and uneven temperature distribution, it is likely to cause thermal deformation, cracking, leakage, increased oil consumption, cementing , Burning, deterioration of the oil quality, abnormal combustion, etc. In addition, the water temperature, oil temperature must be maintained within the appropriate range. If the above problems exceed a certain limit, the engine will fail. Therefore, when designing the engine, of course, based on experience and calculation