Effects of different sintering temperature and sintering time on the relative density of the sintered compacts were studied to obtain the optimal sintering para
MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures. The co
The corrosion resistance of 2024 Al and SiC particle reinforced 2024 Al metal matrix composite (SiCp/2024Al MMC)in 3.5% NaCl solution was investigated with elec
The three dimensional solidification simulation of the single crystal investment castings at withdrawal rates of 2 mm/min, 4.5 mm/min and 7 mm/min was performed
Compression creep tests of a Ti-48%Al (mole fraction) alloy were carried out at 1150K with soft-orientated PST crystal. Parallel twinning took placed uring the
The problem of adaptive generalized predictive control which consists of output prediction errors for a class of switched systems is studied. The switching law
An investigation of the characteristics of flowrate transients within slug flow was conducted in a largescale outdoor testing facility. The test section consist
The dephosphorization experiments of low phosphorus containing steel by CaO-based and BaO-based fluxes were carried out. The effects of the oxygen potential in
Mixed Al-Si and Al-Si-SiC powders were employed as insert layers to reactive diffusion bond SiCp/6063 MMC (metal matrix composites). The results show that SiCp/