【摘 要】
：
The ejection velocity of rock fragments during rock burst, one of the important indexes representing the rock burst strength, is used most conveniently in the s
论文部分内容阅读
The ejection velocity of rock fragments during rock burst, one of the important indexes representing the rock burst strength, is used most conveniently in the supporting design of tunnel with rock burst tendency and is often determined by means of observation devices. In order to calculate the average ejection velocity of rock fragments theoretically, the energy of rock burst was divided into damage consuming energy and kinetic energy gained by unit volume of rock firstly, and then the rock burst kinetic proportional coefficient η was brought up which could be determined according to the rock-burst damage energy index WD , at last the expression of the average ejection velocity of rock fragments during rock burst was obtained and one deep level underground tunnel was researched using the mentioned method. The results show that the calculation method is valid with or without considering the tectonic stress of tunnels, and that the method can be a reference for supporting design of deep mining.
其他文献
MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures. The co
The corrosion resistance of 2024 Al and SiC particle reinforced 2024 Al metal matrix composite (SiCp/2024Al MMC)in 3.5% NaCl solution was investigated with elec
The three dimensional solidification simulation of the single crystal investment castings at withdrawal rates of 2 mm/min, 4.5 mm/min and 7 mm/min was performed
Compression creep tests of a Ti-48%Al (mole fraction) alloy were carried out at 1150K with soft-orientated PST crystal. Parallel twinning took placed uring the
The problem of adaptive generalized predictive control which consists of output prediction errors for a class of switched systems is studied. The switching law
An investigation of the characteristics of flowrate transients within slug flow was conducted in a largescale outdoor testing facility. The test section consist
The dephosphorization experiments of low phosphorus containing steel by CaO-based and BaO-based fluxes were carried out. The effects of the oxygen potential in
Mixed Al-Si and Al-Si-SiC powders were employed as insert layers to reactive diffusion bond SiCp/6063 MMC (metal matrix composites). The results show that SiCp/
根据建设工程风险的特点,论述已被广泛应用的非保险转移这一风险对策.
In order to optimize the sintering process, a real-time operation guide system with artificial intelligence was developed, mainly including the data acquisition