Dynamic and Static Aging Precipitation of β-Mg17Al12 in the AZ80 Magnesium Alloy During Multi-direct

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:bassdd
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Dynamic and static aging precipitation of Mg17Al12 phases in AZ80 magnesium alloy was studied by multidirectional forging (MDF) with decreasing temperatures from 410 to 300 ℃ and subsequent aging process.The results show that the morphology of the β-Mg17Al12 phases during forging process dynamically precipitates and aging process (statically precipitation) exhibited granular and laminar shapes,respectively.During the MDF,the inhomogeneous dynamic precipitation of the β-Mg17Al12 phases results in the uniformity on grain size,which is fine in the area with many granular Mg17Al12 phases but the grain is still coarse where there is no Mg17Al12 phases.During the aging process,the morphology of newly formed β-Mg17Al12 phases depends on the structural character of the forged sample.The newly precipitated β-Mg17Al12 phases are coarse laminar and needle-like shape in area with coarse grain.While,the fine newly precipitated β-Mg17Al12 phases are fine granular and needle-like in the area with fine grain.
其他文献
Four CrAlN coatings with various Al content were prepared by arc ion plating technology under different target currents.The effect of the Al content on the microstructure,chemical compositions,element chemical bonding states and mechanical properties of t
Nanocrystalline Ti54.5Ni45.5 thin film was prepared by magnetron sputtering followed by rapid thermal annealing.The film displayed martensite structure and (001) compound twin substructure,and the transformation temperatures Ms and As are 313 and 365 K,re
Ordered titanium dioxide nanotubes (TiO2NTs) modified with indium tin oxide (ITO) films were obtained via magnetron sputtering,in which ITO plate was used as a target,onto the as-anodized titania support followed by the calcination process.The morphology
The intrinsic relationship between the microstructure evolution and thermal fatigue behavior of a single-crystal cobalt-base superalloy has been investigated.The thermal fatigue tests are performed cyclically between room temperature and 1050 ℃ using V-no
This study presented a quantitative investigation of deformation behavior and dynamic recrystallization of low-alloy high-strength Ni-Cr-Mo-V steels during hot deformation. A series of isothermal compression experiments were performed at temperatures rang
0The effect of peak temperature (Tp) at 200,300,400,500 and 550 ℃ on the microstructural evolution and softening behavior of the simulated heat-affected zone (HAZ) was studied in the 2219-T87 alloy by electron-backscatter diffraction,transmission electron
The fly ash cenosphere/AZ91D composites were successfully prepared and isothermally heat-treated at different temperatures for different time. The effects of semi-solid isothermal heat treatment on the microstructures and damping capacities of fly ash cen
The effect of sample geometry aspect ratio (l/w) on the giant magnetoimpedance (GMI) in Fe67Co18Si11B4 amorphous ribbons was investigated systematically.The GMI profiles were measured as a function of the external magnetic field at different frequencies u
A modified FGH96 superalloy using 0.1 wt% graphene was successfully prepared using the wet mixing method.The interfacial bonding mechanism between the graphene and the superalloy matrix was characterized using optical microscope,scanning electronic micros