一、概述上钢三厂中板车间是一个年产40多万吨中板的双机架轧钢车间,设有二段连续加热炉三座,加热炉的有效尺寸21.808×3.364m~2,燃料为重油、渣油,炉子采用全侧烧咀双面加热,上、下各有8个烧咀。车间加热炉的燃料量、空气量过去均为手动调节,空气量不能按照燃料量的变化及时准确变化,造成燃料的浪费,炉温也不稳定。因此在北京钢铁设计研究总院的帮助下,在中板车间3~#加热炉原有工艺,检测设 First, an overview Shangshang Iron and Steel Co., Ltd. is a mid-plate workshop with an annual output of more than 400,000 tons in the plate of the two-stand rolling mill, with two continuous heating furnace three, heating furnace effective size 21.808 × 3.364m ~ 2, fuel For the heavy oil, residual oil, the stove uses full side burner Tsui double-sided heating, up and down each have 8 burning Tsui. Workshop heating furnace fuel, air volume in the past are manually adjusted, the amount of air can not be accurately and timely changes in the amount of fuel changes, resulting in a waste of fuel, the temperature is not stable. Therefore, with the help of Beijing Iron and Steel Design and Research Institute, in the plate workshop 3 ~ # original furnace technology, testing equipment