我们在练习用切接法进行嫁接的过程中,设计制作了简单的切接用具——切接板。制作与使用方法如下。1.制作方法:利用废木块、木板做成,分插板与踏板两部分,二者大小可根据木料情况与操作上的便利和需要而决定。插板与踏板做好后,用洋钉两个在踏板反面向上把插板钉在踏板的一端。踏板长5 We practice in the process of grafting with the splice method, the design made a simple cut the harness - cut the board. Production and use as follows. 1. Production methods: the use of waste wood blocks, made of wood, sub-board and pedal two parts, both the size and operation of timber according to the convenience and needs of the decision. After the flapper and the pedal are made, use the two studs to nail the flapper upward at the opposite end of the pedal. Pedal length 5