论文部分内容阅读
联谊大厦工程高108.65米,建筑面积29872平方米,地下一层,地面以上二十九层。为全现浇框筒结构,玻璃幕墙铝合金外装饰。该大厦仅用十四个月即建成,施工机械主要设备从国外引进。现介绍如下: 一、主要施工机械选用和使用方案根据现场情况,工程结构特点和工期要求,确认主体结构是整个施工的主要环节。机械选用以这个阶段运输量最大的施工模具,砼和钢筋为主,选配恰当的垂直运输机械。最后确定主要施工机械为: 1.70HC内爬吊一台(主塔吊);
The friendship building project is 108.65 meters high, with a building area of 29,872 square meters, a basement floor and 29 floors above the ground. For the whole cast-in-place frame structure, the glass curtain wall aluminum alloy exterior decoration. The building was completed in only 14 months and major equipment for construction machinery was imported from abroad. Now introduced as follows: First, the main construction machinery selection and use program Based on the site conditions, project structure characteristics and duration requirements, confirm the main structure is the main part of the entire construction. The machinery is selected to use the largest amount of construction molds for transportation at this stage, concrete and rebar, and appropriate vertical transportation machinery. Finally determine the main construction machinery as follows: 1.70HC climb a crane (main tower crane);