阿特拉TorkBuster扭转冲击发生器通常被直接安装在旋转钻井总成中PDC钻头的上方。这种发生器能给钻头施加一种高频扭转冲击力,当与稳态钻柱扭矩相结合时,能直接对钻头产生很高的功率,从而大大降低钻头的粘-滑现象,大幅提高机械钻速,延长钻头寿命。由于该工具的长度不大,所以对底部钻具组合的影响很小,并且已证实无论在旋转钻井、定向钻井、高性能钻井以及旋转导向钻井中均性能优良。 The Atlas TorkBuster Torsion Impact Generator is usually mounted directly above the PDC bit in a rotary drilling assembly. The generator gives the drill a high-frequency torsional impact, which, when combined with a steady-state drill string torque, produces a high power directly on the drill bit, greatly reducing the stick-slip behavior of the drill and dramatically increasing the mechanical Drill speed to extend bit life. Because of its small length, the tool has had little impact on the bottom hole assembly and has proven to perform well in both rotary, directional, high performance and rotary steerable.