齿轮是机械工业中的重要零件,应用范围广、批量大、精度要求高。目前,多数厂还是采用机械加工方法,工序多、效率低、不能满足生产上的大量需要,为此急需寻求更先进的加工方法。电解加工是六十年代发展起来的一项先进加工技术,国内外已应用到锻模、涡轮机叶片、穿孔等加工中,应用范围也在逐步扩大,但是由于过去对其工艺规律性认识不够,因此用于大批量生产的还不多。我厂广大职工在苏州电加工研究室的密切配合下,遵照毛主席的教导:“中国人民有志气,有能力,一定要在不远的将来,赶上和超过世界先进水平。”几年来,通过不断的试验、生产,总结经验,扩大了电 Gear is an important part of the machinery industry, a wide range of applications, large quantities, high precision. At present, most plants still use mechanical processing methods, many processes, low efficiency, can not meet the large number of production needs, urgent need to seek more advanced processing methods. Electrolytic processing is an advanced processing technology developed in the 1960s. It has been applied to the processing of forging dies, turbine blades and perforations at home and abroad. The scope of application is gradually expanding. However, due to the lack of understanding of the regularity of the process in the past, Not for mass production. With the close cooperation of Suzhou Electro-Processing Laboratory and our labors, our factory follows the teachings of Chairman Mao: “The Chinese people have ambition and ability and must catch up with and surpass the world’s advanced level in the near future.” In recent years, we have expanded our electricity generation through constant experimentation, production and lessons learned