论文部分内容阅读
The adsorptive behavior of nanometer attapulgite modified by acid to Pb(II) was investigated by flame atomic absorption spectrometry (FAAS) in this paper. The mainly effect parameters on the adsorptive efficiency of Pb(II), such as the acidity of the solution, the amount of attapulgite, oscillation time and static time were studied. Also the influencing factors of the recovery efficiency of Pb(II), including the concentration of hydrochloric acid, the volume of hydrochloric acid, oscillation time and static time were investigated. The adsorptive capacity of Pb(II) on nanometer attapulgite was 26.5mg/g and the adsorptive capacity of first cycle and second cycle regenerated nanometer attapulgite were 26.5mg/g and 26.3mg/g, respectively. The results obtained indicated that the regenerated effect was good.
The adsorptive behavior of nanometer attapulgite modified by acid to Pb (II) was investigated by flame atomic absorption spectrometry (FAAS) in this paper. The mainly effect parameters on the adsorptive efficiency of Pb (II), such as the acidity of the solution, the amount of attapulgite, oscillation time and static time were studied. The influencing factors of the recovery efficiency of Pb (II), including the concentration of hydrochloric acid, the volume of hydrochloric acid, the time of the static and static time were investigated. The adsorptive capacity of Pb (II) on nanometer attapulgite was 26.5 mg / g and the adsorptive capacity of first cycle and second cycle regenerated nanometer attapulgite were 26.5 mg / g and 26.3 mg / g, respectively. The results obtained indicated that the regenerated effect was good .