论文部分内容阅读
1.主轴挂轮的调整:根据剃齿机床刚性、工件模数大小、材料性质、剃齿方式和剃齿刀直径大小等情况,按说明书推荐数据来选用挂轮。 2.进给量的调整,按材质与模数选择径向进给量,一般选取0.01～0.02mm,轴向进给量大小对齿面粗糙度有影响,过大齿面会出现有规则的波纹,一般选取范围0.05～0.10mm/r。 3.超越行程的调整:根据剃齿方式而定,如采用平行(普通轴向)剃齿法,为保证齿向精度,一般约为剃齿刀厚度的1/2。 4.机床前后顶尖工作表面(即锥面)振摆应小于0.005mm,顶尖用检
1.Adjustment of the spindle pulley: according to the rigidity of the shaving machine, the modulus of the workpiece, the nature of the material, the method of shaving the teeth and the diameter of the shaving cutter, and so on, according to the data recommended in the instruction manual. 2 feed adjustment, according to the material and modulus to select the radial feed, the general selection of 0.01 ~ 0.02mm, axial feed size of the tooth surface roughness affect the excessive tooth surface there will be regular ripples , The general selection range of 0.05 ~ 0.10mm / r. 3. Beyond the travel adjustment: Depending on the shaving method, such as the use of parallel (normal axial) shaving method, in order to ensure tooth accuracy, shaving cutter is generally about the thickness of 1/2. 4 top and back of the machine work surface (ie, cone) vibration should be less than 0.005mm, the top check