【摘 要】
：
The hot working behaviour of intermetallic titanium aluminide alloys was described. The microstructural evolution during hot working was systema tically studied
【机 构】
：
Institute for Materials Research
论文部分内容阅读
The hot working behaviour of intermetallic titanium aluminide alloys was described. The microstructural evolution during hot working was systema tically studied on a series of binary and technical alloys with aluminium contents ranging between 45% and 54%(mole fraction). Process regimes in terms of temperature and strain rate were identified which allow large strain hot working to be carried out, either by forging or extrusion, with the production of sound forgings. Them ajor areas addressed in the paper are ingot structure and homogenization, factors determining hot working and recrystallization, ingot conversion , and secondary processing.
其他文献
The preparation of Ni oxide films and their capacitive mechanism are discussed in this paper. Nickel oxide film electrodes perform pseudocapacitance in aqueous
The performance of UV/H2O2, UV/O3, and UV/H2O2/O3 oxidation systems for the treatment of municipal solid-waste landfill leachate was investigated. Main objectiv
The Vrentas-Duda free-volume theory has been extensively used to correlate or predict the solvent diffusion coefficient of a polymer/solvent system. The energy
On the basis of a great number of experiments, it is proved that the strength of concrete is improved greatly when it is mixed with activated water produced by
Thermal shock behaviour was investigated for two morphologically different composites comprising an alumina matrix and 20 vol. pct Fe particles for a wide range
Si-B-O-N powder without B-O bonds synthesized by polymeric precursor were hot-pressed into ceramics at different temperatures. The variations of microstructure
Photoacoustic (PA) imaging is a new imaging modality, which converts pressure signals received by a scanning detector to a local distribution of electromagnetic
于2000-2001年采集了中国沿海10个采样点的表层沉积物样品,研究了有毒亚历山大藻(Alexandrium spp.)和链状裸甲藻(Gymnodinium catenatum)孢囊的分布.结果表明,这两类孢囊几
在海上多分量地震勘探中 ,会不可避免地涉及到水平分量检波器的方位确定及其旋转校正问题。特别是当多分量数据采集采用绕圈悬挂式海底电缆系统进行作业时 ,水平分量检波器的
A three-dimensional heat transfer model for continuous steel slab casting has been developed with realistic spray cooling patterns and a coupled microsegregatio