论文部分内容阅读
一、把长定尺改为移动式的短定尺我们在3.4米立车上安装数显装置时,遇到了很多困难,如:可安装定尺的部位都不是基准面,阿贝误差严重,由于溜板间隙较大,同步器装置离刀太远,上好刀后,一吃刀,刀杆即受力向后,造成数显表先反记数,待正常走刀后,才开始正记数。数显表数字与实际加工尺寸误差较大,不能保证图纸要求。我们考虑到一般工件加工量不超过100毫米,而一块定尺与一块滑尺有效检测位移量为150毫米,所以,一块定尺完全可以完成立车横向加
First, the long fixed to short-term mobile We installed a 3.4-meter vertical car digital display installation, met a lot of difficulties, such as: the installation of fixed-length parts are not the reference plane, Abbe error is serious, As a larger gap between the slide, the synchronizer device is too far away from the knife, a good knife, a knife, the knife that is force backward, resulting in the number of tables before the anti-note, to be normal after the knife before it is Calculate. Digital display and the actual size of the larger processing errors, can not guarantee the drawings. We take into account the general processing capacity of not more than 100 millimeters, and a piece of ruler and a slider to effectively detect the displacement of 150 mm, so a piece of ruler can be completed vertical vehicle legislation