Capillary wave formation on excited solder jet and fabrication of lead-free solder ball

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:euufhuhfu
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
A survey of solder ball production processes especially focusing on disturbed molten metal jet breakup process was made. Then the formation of capillary wave on tin melt jet in the way of rapid solidification was studied. A semi-empirical formula, which can be written as λ = Cvib (σ/ρ)1/3f-2/3 to predict the relationship between wavelength of capillary wave and frequency of imposed vibration was obtained. Sn-4.0Ag-0.5Cu lead free solder ball was successfully produced with tight distribution and good sphericity. The excited jet breakup process is promising for cost effectively producing solder ball.
其他文献
A new iris feature extraction approach using both spatial and frequency domain is presented. Steerable pyramid is adopted to get the orientation information on
A comprehensive stochastic model for simulating microstructure formation of Ti-45 % Al(mole fraction)alloy ingot during solidification process was developed, ba
This paper presents a type system, called Location System (L-S), to control the interferences in the ambient-like calculi. The L-S allows well-behaved (non-inte
It is demonstrated that the nickel can be deposited directly on the surface of carbon nanotubes without pre-sensitization by Sn2+ and Pd2+ in a watt bath contai
A new linear integration was developed. First, effective strain rate for slab forging with bulge was expressed in terms of two-dimensional strain rate vector, a
The anomalous photovoltaic effect was studied in epitaxial La0.8Sr0.2MnO3 films by laser molecular beam epitaxy. It is demonstrated that the signal polarity is
Eu-doped silicate complex gel nano-particles was obtained by sol-gel process and characterized with TEM, XRD, PL, etc. The well dispersed particles have particl
The evolution of phase compositions, phase change and microstructure in Sm2Fe17 alloys during hydrogenation-disproportion process were systematically studied wi
以某造纸企业废水治理工程为研究对象。具体介绍了“混凝气浮一生物接触氧化法”工艺的具体流程和技术特点,实践表明:该工艺具有一定的先进性,处理后水能达到国家污水二级排放标
The surface modification of magnesium alloys (AZ31 and AZ91HP) was studied by a high current pulsed electron beam(HCPEB). The results show that the cross-sectio