electroplating相关论文
THE INFLUENCES OF SOLUTION PH AND CURRENT DENSITY ON COERCIVITY OF ELECTROPLATING CoNdNiMnP PERMANEN
The influences of plating bath solution PH and current density on coercivity of electroplating CoNdNiMnP permanent magne......
Highly thermal-conductive graphite flake/Cu composites prepared by sintering intermittently electrop
Graphite flake/Cu composite has attracted tremendous attention as a promising heat sinks materi-als owing to its easy ma......
采用氨基磺酸镍为主盐,研究了不同氯化镍浓度对厚镍镀层的表面形貌、晶粒取向及大小的影响,并测试了镀层标准样的屈服强度、抗拉强......
Pt-diffused coatings were synthesized on Ni10Al alloy by electroplating a thin layer of Pt (1-5 μm) followed by a diffu......
分析了涂装前处理、电镀生产线的加温使用的能源现状，介绍了新能源技术在涂装前处理、电镀生产线上的应用，以我公司设计、施工的......
将全生命周期评价的基本方法和传热模型相结合,以市场上较为普遍的两种分别使用电镀法和物理气相沉积法(PVD)制作的太阳能选择性涂......
Electroplating of Ni/Co-pumice multilayer nanocomposite coatings: Effect of current density on cryst
该文从挂篮荷载计算、施工流程、支座及临时固结施工、挂篮安装及试验、合拢段施工、模板制作安装、钢筋安装、混凝土的浇筑及养生......
研究了电化学沉积金凸点的晶圆级直径和厚度分布及表面粗糙度随电镀电流密度和镀槽温度的变化.电化学沉积的金凸点在整个晶圆上的......
黑铬作为最具吸引力的太阳能选择性吸收材料之一,已得到实验证实并用于太阳能收集器.本文评价了黑铬太阳能选择性吸收器的热稳定性......
研究了In焊料的电镀制备方法和制备过程,分析了In焊料电镀过程中出现的镀层覆盖不完全、焊料晶粒尺度大、焊料熔化后气孔较多、凝......
以腐蚀铜网为基体,在硫酸盐镀液中制备得到用于电还原CO2的铟-锡合金电极.对镀液配方进行了筛选,并通过正交试验对镀液配方进行优......
以紫铜片为基体,采用电镀或化学镀法分别制备了Ni、Sn、Ni–P以及Ni–Sn–P镀层。通过测定Tafel极化曲线和电化学阻抗谱,对比研究......
采用NF1201水相封孔剂对金手指进行封孔处理。通过中性盐雾试验、稀硝酸浸泡试验、饱和二氧化硫试验及电路导通测试等研究了NF1201......
在由26.8 g/L NiSO4·6H2O、150 mL/L BH-320B和30 mg/L稳定剂组成的酸性化学镀镍液中,研究了电镀镍用中间体ATQM、SSO3、MPA和DEP......
利用钨酸钠通过电沉积在S135高强度钻杆用钢表面制备了Fe–Ni–W合金镀层。采用极化曲线测量以及结合力、显微硬度、厚度等测试研......
Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the diffe......
...
The effect of rare earth additives used in chrome-plating on the electroplated coating behaviors of the luminosity, brig......
It is demonstrated that the nickel can be deposited directly on the surface of carbon nanotubes without pre-sensitizatio......
Effect of Co-Deposited Iron on Microstructures and Properties of Electroplated Nanocrystalline Nicke
Nickel-iron nanocrystalline alloys with different compositions and grain sizes were fabricated by electroplating for MEM......
-creases when the SiC content increases, but the corrosion resistance of NiP-SiC composite coating is better than that o......
The compact Cu coating with smooth surface and refined grain was prepared at high current density by mechanical attritio......
A one-step pickling-activation process was proposed as an environmental friendly pretreatment method in phosphate-perman......
Fe-Ni alloy coatings were electrodeposited on ferritic stainless steel (FSS) in solutions containing FeSO4 and NiSO4. Th......
This study was conducted to assess the occupational exposure and its health impact on the chromium alloyworkers. Environ......
探讨了反渗透技术用于电镀废水再生和回用的实际问题,主要包括:回用工艺流程长,反渗透膜易结垢,再生水含一定污染物,再生水回用潜......
回忆了20世纪90年代初,某国营电镀厂为扭亏为盈而从事石膏电镀生产,却仍难逃倒闭命运的一段辛酸历程.......
我国电镀废水排放有3个不同等级的标准。执行不同的排放标准，所用的工艺方法不尽相同。活性炭能解决其他工艺方法不易解决的问题。......
根据对国内电镀工业园的走访调查，从废水处理设施的营运模式（间断运营与连续运营）、工艺选择（包括化学法、化学法＋生物法、化学法＋膜处理......
The amorphous of Permalloy on the copper subtract was studied using composite electroplating method. A portion of hydrog......
在电镀溶液中使用连二硫酸和连二硫酸金属盐作为可溶性金属离子和电解质的来源具有潜在的应用.为有助于具有创新精神的配方研究者......
In order to improve the performances of electroplating permanent magnetic films, neodymium is introduced into the electr......
PREPARATION OF LEAD-ACID BATTERY USING ELECTROPLATED RETICULATED SiC AS THE POSITIVE CURRENT COLLECT
The possibility of using Pb-electroplated reticulated SiC as the positive current collector for lead-acid batteries was ......
Metal-coated fiber Bragg grating(FBG) temperature sensors were prepared via electroless nickel(EN) plating and tin elect......
Relationship between dispersibility of ZrO2 nanoparticles in Ni-ZrO2 electroplated nanocomposite coa
Ni-ZrO2 nanocomposite coatings with monodispersed ZrO2 nanoparticles were prepared from the composite plating bath conta......
Ion beam etching technique was used to reveal the metallograhpic microstructure and interface morphology of electroplati......
计算机控制的行车调度系统广泛地应用于先进制造系统中的材料搬运,电镀行车的调度方式,已经成为提高生产率的瓶颈问题.行车调度问......
介绍了多层镍(包括双层、三层、四层)、多层镍铁合金、多层铜、双铬、双锌等工艺的特点及应用.......
The method of controlling separating anode and separating power source was used to perform orthogonal optimization for t......
经过对锡-铋合金镀液长期浑浊故障进行分析,提出通过提高硫酸含量、加入苯酚类添加剂来减缓二价锡氧化。在硫酸为140~150 g/L,苯酚......
为了得到适用于AZ91D镁合金的电镀前处理工艺,提高镀层与镁合金基体的结合力及镁合金的耐蚀性,采用正交试验方法研究了酸洗液中不......
研究了采用弱酸性氯化物体系电镀锌镍合金时镀液的镍锌比、温度、氯化铵含量,以及阴极电流密度、电镀方式等工艺参数对镀层镍含量......
为解决电镀铬工艺严重污染环境的问题,制备低污染且具有良好外观的Ni-Co-B合金代硬铬镀层。采用单因素实验分别讨论电镀液组成及工......
锌基合金材质零配件具有力学性能高、摩擦性能优良、耐磨性能好、无火花和无磁性等特点，可以代替价格较贵的（锡、铝）青铜和（铅）黄铜等铜......
研究了一种镁合金表面直接电镀镍的新工艺．采用脉冲电流法预镀镍，再采用脉冲电流或恒电流方法电沉积镍，可在镁合金表面获得结合力、防......
为获得性能良好的Au-Fe合金镀层，在以KAu（CN）2，FeSO4，KCN及柠檬酸钾为主要成分的镀液中对铜件进行电镀，沉积出了装饰性Au-Fe合金镀层。采......
在电沉积Ni过程中,向镀液中加入介质小球,介质小球以不同频率冲击镀件表面对镀层形成机械研磨。用SEM观察镀层表面、截面形貌,用TE......
电镀行业是产生、排放重金属污染物的行业之一。电镀企业首先要摸清排污规律、明确环保目标，再通过加强配套环保设施并加强管理、确......
采用甲基磺酸盐体系镀液在0603型陶瓷电阻表面电镀纯锡，表征了纯锡镀层的厚度、微观结构和可焊性。通过计算镀层厚度的CPK（制程能力......
在手工电镀生产线电镀的过程中,镀件经常掉入水中,时间过长容易造成镀件报废。文章在应用RFID技术的基础上,提出一个区域定位方法,......
