论文部分内容阅读
多工位铣槽成组夹具如图所示,可安装在铣床上对制动螺钉等圆柱形零件的端头进行铣槽。零件放在活动夹块9、10和固定夹块11的90°V形槽中,活动夹块两侧的导向槽嵌在本体1顶板长方孔的两侧,并可自由滑动。拧紧螺钉6,工件就被90°V形槽自动定心夹紧。因此,该夹具可夹持直径大小不一的工件。
Multi-position milling Milling fixture as shown in the figure, can be installed on the milling machine to brake screws and other cylindrical parts of the milling end. The parts are placed in the 90 ° V-shaped grooves of the movable clamp blocks 9 and 10 and the fixed clamp block 11. The guide grooves on both sides of the movable clamp block are embedded on both sides of the rectangular hole of the top plate of the main body 1 and can slide freely. Tighten the screw 6, the workpiece is automatically 90 ° V-shaped groove clamping. Therefore, the fixture can clamp different diameter workpiece.