论文部分内容阅读
1.原送料导板状况M775Z1的送料导板原为固定在床身接近于料盘两面边缘上,不能活运.当送料不稳时,滚子进入导板区域容易卡死在料盘和导板之间,需要立即停机,松动固定导板螺钉才可将被卡滚子拿掉,重新开机需调整导板和对刀.卡滚子易导致料盘变形和报废,滚子卡伤,导板变形和磨损,直接影响滚子的加工质量.为此,我们对该机构进行了改进.2.送料导板的改进
1. The status of the original feed guide M775Z1 feed guide was fixed in the bed near the edge of the tray on both sides, can not live when the feed is unstable, the roller into the guide area easily stuck between the tray and the guide plate, Need to stop immediately, loosen the fixed guide screw can be removed by the card roller, reboot need to adjust the guide and the knife knife card easily lead to disc deformation and scrap, roller card injury, guide deformation and wear a direct impact Roller processing quality.To this end, we have made improvements to the mechanism .2. Feed guide plate improvement