论文部分内容阅读
Quantitative Analysis of the Crystallographic Orientation Relationship Between the Martensite and Au
【出 处】
：
金属学报（英文版）
【发表日期】
：
0年期
其他文献
In this work, the serpentine powders were sintered to make the serpentine-reinforced Al-matrix composites, and the microstructures of which were characterized by differential scanning calorimetry, thermal gravimetric analyzer, and X-ray diffractometer. Sc
The Stern-Geary constant (B value) is indispensable to measure the corrosion rate in the microbiologically influenced corrosion (MIC) systems.Linear polarization resistance (LPR) and weight loss methods were used to study the variation of B values for X80
Gamma-phase influence on shape memory properties in Ni-Mn-Co-Ga-Gd high-temperature shape memory all
The effect of γ-phase on two-way shape memory effect (TWSME) of polycrystalline Ni56Mn25-xCoxGals.9Gd0.1 alloys was investigated.The results show that an appropriate amount of ductile γ-phase significantly enhances the TWSME.The largest TWSME of 1.4％ with
The effects of substituting Co for Fe on the microstructure and stress rupture properties of K4750 alloy were studied.The microstructure of the alloy without Co (K4750 alloy) and the alloy containing Co (K4750-Co alloy) were analyzed.Substitution of Co fo
Torsional Fatigue Cracking and Fracture Behaviors of Cold-Drawn Copper: Effects of Microstructure an
The fatigue cracking and fracture behavior of cold-drawn copper subjected to cyclic torsional loading were investigated in this study.It was found that with increasing stress amplitude,the fracture mode of cold-drawn copper gradually changes from a shear
Structure and Magnetic Properties of Magnetostrictive FeGa Film on Single-Crystal (100) GaAs and (00
FeGa thin film has been deposited on (100)-oriented GaAs and (001)-oriented Si substrates with different film thicknesses and laser energy densities at room temperature by pulsed laser deposition system. Materials structure and static magnetic of FeGa fil
Microalloying is an effective approach to improve the mechanical properties of γ-TiA1 intermetallic compound.Knowledge about the site occupancy of the ternary alloying element in the crystal lattice of γ-TiAl is highly demanded in order to understand the
Classical powder metallurgy followed by either hot isostatic pressing (HIPing) or repressing-annealing process was used to produce Cu-graphene nanoplatelets (GNPs) nanocomposites in this work.A wet mixing method was used to disperse the graphene within th
Shear Model of Metal Melt Flowing on Vibration Wall and Effect of Shear Stress on Solidification Mic
In this work, the shear model of metal melt flowing on vibration surface is established, and coupling effects of vibration and shear on the distribution of shear stress in melt and melt solidification microstructure are analyzed. Calculation results show
Morphological Evolution of Fe-Rich Phases in the AlSi9Cu3Mg0.19(Fe) Alloy with the Addition of Minor
The morphological evolution of Fe-rich phases in the AlSi9Cu3Mg0. 19(Fe) alloy has been investigated with various contents of Fe, Mn, and Cr. The results show that coarse Chinese script Fe-rich phases appear in the alloy with 0. 6 wt％ Fe combined with tra