Effects of Ni Content and Ball Milling Time on the Hydrogen Storage Thermodynamics and Kinetics Perf

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:myplucky
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The effects of Ni content and ball milling time on the hydrogen storage thermodynamics and kinetics performances of asmilled La5Mg95-xNix(x =5,10,15) ternary alloys have been investigated.The evolution of microstructure and phase of experimental alloys in the absorption/desorption process has been characterized by XRD,SEM and HRTEM.The hydrogen storage kinetics and thermodynamics performances and PCI curves have been tested using the Sievert apparatus.It is found that the rising of Ni content remarkably improves the hydrogen storage kinetic performance,but reduces hydrogen storage capacity.And with the increase in milling time,hydrogen desorption activation (Ea) value decreases firstly and then increases;the minimum value is 47.6 kJ/mol,and the corresponding milling time is 10 h for La5Mg85Ni10 alloy.As for the thermodynamics properties,the hydrogenation enthalpy (△H) and hydrogenation entropy (△S) both decrease firstly and then increase with the rising of Ni content and milling time.The composite La5Mg85Ni10 alloy milled for 10 h exhibits the best thermodynamics and kinetics performances,the lowest Ea of 47.6 kJ/mol,absorption of 5.4 wt.% within 5 min and desorption of 5.2 wt.% within 3 min at 360 ℃ and the lowest △H and △S of 72.1 kJ/mol and 123.2 J/mol/K.
其他文献
Type I hot corrosion behavior of SiO2-Al2O3-glass composite coating based on Ti-47Al-2Cr-2Nb substrate was investigated in the mixture salt of 25 wt%NaCl + 75 wt%Na2SO4 at 850 ℃.The results showed that there was a bidirectional ion exchange between compos
Mg-Zn-Zr series Mg alloys (ZK) are one of the most important commercial Mg alloys due to their good comprehensive mechanical properties.The phase equilibria of the Mg-Zn-Zr system at 400 ℃ covering the overall composition range were investigated by X-ray
In the present study,a quenching treatment prior to two-stage heat treatment was conducted on a Fe-0.28C-1.55Mn-2.06Al transformation-induced plasticity steel to tailor the final microstructure.Compared with the microstructure of the ferrite,bainite and b
The damage behaviors of a titanium matrix composite shaft under torsion loading were monitored using the acoustic emission technique.The composite shaft with SiC fibers at ± 45° orientations was prepared by the solid-state fabrication process.Both the tor
Ni-based self-lubricating composites containing a fixed amount of hexagonal boron nitride (h-BN) (5 wt%) and different amounts of graphene (0-1.5 wt%) were prepared by ultrasonic dispersion,high-energy ball milling,and spark plasma sintering.The effects o
The corrosion behavior of high-strength steel used for flexible riser exposed to CO2-saturated saline solution and CO2-saturated vapor environments was studied through immersion experiment and electrochemical corrosion experiment.The corrosion behavior an
The effect of hot isostatic pressing (HIP) treatment on the fatigue notch sensitivity of Ti-6Al-4V alloy fabricated by electron beam melting (EBM) was investigated.The results indicate that the fatigue notch sensitivity of the as-fabricated samples is muc
Porous titanium scaffold with suitable porous architecture exhibits enormous potentials for bone defect repairs.However,insufficient osteointegration and osteoinduction still remain to open as one of the major problems to achieve satisfactory therapeutic
The study conveys an idea to enhance the osseointegration of titanium implant (Ti) through modulating macrophages M2 polarization.The ~ 100 nm spherical mesoporous silica nanoparticles (MSN) that compromised of ~ 4-nm-diameter nanotunnels were synthesized
The residual stress evolution in a safe-end/nozzle dissimilar metal welded joint of CAP1400 nuclear power plants was investigated in the manufacturing process by finite element simulation.A finite element model,including cladding,buttering,post-weld heat