论文部分内容阅读
简化设备安装工作，是当前钻探工作上重要任务之一，为此，我队目前在使用KA-2M-300型钻机夹板安装的基础上，经过试验采用了新型的KAM-500型钻机暗夹板安装法。这种安装方法，只用5-10分钟就可固定一台钻机，较过去在基台木上钻眼的方法固定钻机的时间缩短为1/5—1/(10)。不仅固定的快，而且较旧的固定方法更能保证质量。过去安装方法是先要将钻机按钻孔方位角或倾角对正，划出基础螺丝孔的位置，然后把钻机移开，或事先根据方位角和倾角在基台木上测找出固定钻机之螺丝孔位置，进行钻眼，再对正钻机穿好螺丝杆固定。这种操作方法，往往将
The simplification of equipment installation is one of the most important tasks in current drilling. For this reason, our team is currently using the KA-2M-300 drilling rig splint installation, and after testing, a new type of KAM-500 drill rig is used to install the dark splint. law. With this installation method, a rig can be fixed in only 5-10 minutes, and the time for fixing the rig is shortened by 1/5 to 1/(10) as compared with the method of drilling holes on the abutment wood in the past. Not only is it fixed fast, but the older fixing method guarantees quality. In the past, the installation method was to first align the drilling rig with the azimuth or inclination of the drilling hole, draw the position of the foundation screw hole, and then remove the drilling rig, or find the fixed drilling rig on the abutment wood according to the azimuth and inclination. Position the screw hole, drill the hole, and fix the rig to the threaded rod. This method of operation will often