剃齿机自动循环加工的主要特点是工作台持续往复直线运动以及周期性的径向进给运动(见图1)。六十年代国内剃齿机的径向.进给是采用等量进给(如T4232 A型剃齿机)。到七十年代就采用转盘控制的不等量进给。为了提高齿轮表面加工质量,在剃齿机上又增加了径向进给完成后的二次或四 Automatic re-shaving machine is characterized by the main cycle of reciprocating linear motion and periodic radial feed movement (see Figure 1). In the 1960s, the radial direction of the domestic gear shaving machine was fed in the same amount (such as the T4232 A-Shaving Machine). To the seventies use dial control of the unequal amount of feed. In order to improve the quality of gear surface machining, the gear machine has added a radial feed after the completion of the second or fourth