论文部分内容阅读
本文介绍的是一种由巨型立式六工位回转工作台式机床和卧式七工位直线式自动线组成并前后衔接的加工系统,用于加工多种卡车后桥壳(有的工件长达3.8米)。每小时可加工40件。 工件(见图1)先安装和夹紧在六工位机床的回转工作台上,经过加工之后卸下并送到七工位自动线上继续加工。回转工作台的顶端高约4.6米,在地面上以回转工作台为中心,加上它周围外伸的加工设备,其直径约9.4米。
This article presents a processing system consisting of a giant vertical six-station rotary table machine and a horizontal seven-position linear automatic line for the processing of a variety of truck rear axle housings (some as long as 3.8 Meter). 40 pieces per hour can be processed. The workpiece (see Figure 1) is installed and clamped on the rotary table of the six-position machine tool. After processing, the workpiece is removed and sent to the seven-station automatic line for further processing. The top of the swivel table is about 4.6 meters high, centered on the swivel table on the ground, plus the processing equipment that extends around it and has a diameter of about 9.4 meters.