非贵金属助剂Ni2P修饰类石墨碳氮化物光催化剂增强可见光光催化产氢性能

来源 :物理化学学报 | 被引量 : 0次 | 上传用户:jinke1983
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
随着化石燃料的日益枯竭,能源危机已经成为一个严重的全球性问题.开发氢气等环境友好型的可再生能源来替代化石燃料己迫在眉睫.光催化水解制氢被认为是解决这一问题最有效的技术之一,贵金属(如Pt)可以作为助催化剂提高光催化体系的制氢性能,但高昂的成本限制了该技术的进一步应用.因此,开发新型、高性能、低成本的非贵金属助催化剂以替代贵金属助催化剂,对于将光催化产氢技术付诸实践具有重要意义.在此,我们以共轭聚合物(SCN)n为前驱体成功地合成了Ni2P/类石墨碳氮化物光催化剂(Ni2P/CN),在可见光照射下具有优异的光催化产氢性能.使用各种表征技术、光学和光电化学测试研究了这些材料的结构组成、形貌特征以及光学性质.X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)和X射线光电子能谱(XPS)结果表明了合成的Ni2P/CN纳米复合材料具有良好的晶体结构.扫描电镜(SEM)和透射电镜(TEM)结果显示,Ni2P/CN样品具有典型的二维层状结构,Ni2P纳米颗粒均匀地负载在CN表面.紫外-可见漫反射光谱(DRS)结果表明,负载Ni2P纳米颗粒有效地增强了CN对可见光的吸收能力.光致发光光谱(PL)和光电流测试结果表明,Ni2P的负载有利于促进光生载流子的迁移和分离效率.光催化产氢实验是在可见光照射下进行的,以三乙醇胺为牺牲剂.结果 表明,Ni2P/CN复合光催化剂具有良好的光催化还原性能.性能最优的Ni2P/CN复合材料产氢效率达到了623.77 μmol·h-1·g-1,优于以贵金属Pt作助催化剂的CN样品的产氢效率(524.63 μmol·h-1 ·g-1).此外,通过一系列表征、光学以及光电化学测试的分析表明,Ni2P纳米粒子均匀地附着在CN的表面上,并且它们之间存在很强的界面效应,从而形成了抑制光生载流子重组并促进电子迁移的电子传输通道,促进电子从CN迁移至Ni2P.此外,根据实验和表征,提出了一种可能的光催化机理.这项工作对于非贵金属取代贵金属作为光催化产氢助剂的发展具有重要意义.“,”Energy crisis has become a serious global issue due to the increasing depletion of fossil fuels;therefore,it is crucial to develop environmentally friendly and renewable energy resources,such as hydrogen (H2),to replace fossil fuels.From this viewpoint,photocatalytic H2 production is considered as one of the most promising technologies.Noble metal platinum (Pt) can be applied as an efficient cocatalyst for improving the H2 production performance of photocatalytic systems;however,its high cost limits its further application.Thus,the development of novel,high-activity,and low-cost cocatalysts for replacing noble metal cocatalysts is of great significance for use in photocatalytic H2 evolution techniques.Herein,we successfully synthesized a Ni2P/graphite-like carbonitride photocatalyst (Ni2P/CN) using a conjugated polymer (SCN)n as precursor for enhanced photocatalytic H2 production under visible light illumination.Various characterization techniques,including optical and photoelectronic chemical tests,were used to investigate the structural composition,morphology,and light adsorption ability of these materials.X-ray diffraction,Fourier transform infrared spectroscopy (FT-IR),and X-ray photoelectron spectroscopy results showed that Ni2P/CN nanocomposites with good crystal structure were obtained.Scanning electron microscopy and transmission electron microscopy results revealed that the Ni2P/CN samples had a typical two-dimensional layered structure,and the Ni2P nanoparticles were uniformly loaded on the surface of the CN to form a non-noble metal promoter.UV-Vis diffuse reflectance spectra results demonstrated that the loading of Ni2P nanoparticles effectively enhances the adsorption capacity of CN to visible light.Photoluminescence spectroscopy and photocurrent (PL) results suggested that Ni2P loading to CN is beneficial for promoting the migration and separation efficiency of photogenerated carriers.Photocatalytic H2 production was conducted under visible light irradiation with triethanolamine as a sacrificial agent.The results suggest that the Ni2P/CN composite photocatalysts exhibit excellent photocatalytic reduction performance.In particular,the H2 evolution rate of the optimal Ni2P/CN nanocomposite is 623.77μmol·h-1·g-1,which is higher than that of CN modified by noble metal Pt,i.e.,524.63 μmol·h-1·g-1.In conclusion,Ni2P nanoparticles are homogeneously attached to the surface of CN,and a strong interfacial effect exists between them,thereby forming an electron transfer tunnel that greatly inhibits the recombination of photoinduced carriers and promotes the migration of electrons from CN to Ni2P.In addition,a possible photocatalytic mechanism is proposed based on the experiments and characterizations.This work has profound significance for developing non-noble metal cocatalysts for the substitution of noble metal cocatalysts for high-efficiency photocatalytic H2 evolution.
其他文献
三门湾是浙江省重点养殖海湾之一,沿岸海域环境污染和养殖业自身污染对浅海养殖业已造成严重威胁。本文根据2015-2016年对三门湾海域的环境质量调查结果,结合海洋环境功能区划对该海域环境质量现状进行了评价与分析;对海水的富营养化程度,沉积物中重金属的富集程度及潜在的生态危害效应进行综合分析。结果表明:(1)该海域水质除了无机氮、活性磷酸盐、pH和COD部分超标外,其他环境因子符合功能区相应的海水水质标准;(2)该海域沉积物的重金属含量均达标,底质环境状况良好;(3)三门湾海域各季节富营养化指数大于1,表明该
通过船舶响应型数学模型、舵机伺服系统、海浪干扰模型和PID控制器来设计船舶航向控制,并且将粒子群优化算法(PSO)加入到航向控制中,获得最优PID参数值。考虑到粒子群迭代次数和搜索过程中目标函数对PID参数值有一定的影响,主要研究改变迭代次数和目标函数来比较对应的PID参数,根据不同PID参数对应不同的控制效果,继而得出最优控制效果。结果表明:在迭代次数90时,能得到控制效果较好的PID控制参数,目标函数的改变对PID参数值的影响较大。
苗栗是台湾岛的中华绒螯蟹养殖集中地区,苗栗池塘养殖中华绒螯蟹在台湾具有较好的知名度,尚不清楚其可食率和营养品质。本研究以江苏金坛区池塘养殖中华绒螯蟹为对照,测定和比较了台湾苗栗和江苏金坛两地池塘养殖中华绒螯蟹(简称苗栗蟹和金坛蟹)的成体可食率、色泽及可食组织中常规营养成分和脂肪酸组成。结果显示:(1)金坛雄蟹的出肉率显著高于苗栗雄蟹(P<0.05),而2种蟹的其余组织系数和总可食率均无显著差异(P>0.05)。(2)就色泽而言,苗栗雌蟹蟹壳的亮度值(L*)显著高于金坛雌蟹蟹壳(P<0.0
The anatase TiO2 (001) surface has attracted extensive attention in surface science and for practical applications because of its excellent performance.However,
对喀喇昆仑山大黄山稀土-铌-铁钛多金属矿化带地质特征及矿床成因进行研究,为该区找矿勘查工作部署提供依据。通过详细的野外地质调查,在总结大黄山稀土-铌-铁钛多金属矿化带地质特征的基础上,配合镜下鉴定、矿床地球化学分析,探讨矿床成因类型与成矿作用,分析成矿期后的构造变形,预测矿化体的空间就位,提出找矿方向和找矿思路。大黄山稀土-铌-铁钛多金属矿化带含矿建造沉积环境为近陆滨-浅海碳酸盐岩台地相。矿化带处于石炭系帕斯群灰岩组(a组)上段(含矿泥质灰岩段)上部,区内延伸大于30km,西段发现2条矿化体(Ⅰ-1、Ⅰ-
The global energy crisis and environmental pollution have caused great concern.Hydrogen is a renewable and environmentally friendly source of energy and has pot
Microstructure evolution and reaction behavior of Cu-Ni alloy and B4C power system was studied by in-situ and static experimental investigations along with theo
Turbine discs in gas-turbine engines always experience high-temperature and high-stress environment.Extensive investigations have been performed towards achievi
Sintering behavior of ZrB2 ceramic with nano-sized SiC dopant was studied.ZrB2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the compo