Effect of Unsteady Secondary Vortices on Performance of a 1.5-Stage High-Pressure Turbine

来源 :热科学学报:英文版 | 被引量 : 0次 | 上传用户:wangfan2050
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In modern high-load high-pressure turbine,the secondary flow in the blade channel is very strong and occupies a large spanwise region.Although high-quality experimental data at the stage interfaces have been obtained in previous research,the influence of
其他文献
Due to complicated working conditions,the normal operating large-scale wind turbine blades are often suffering from some inevitable problems,i.e.,friction adhes
The aerodynamic forces and vortex characteristics of an H-type Vertical Axis Wind Turbine(VAWT)become complicated because of dynamic stall,particularly in the three-dimensional impact on the blade spanwise direction.This study focused on the evaluation of
针对未建立CPⅡ、CPⅢ精测网的既有铁路,为了能快速、有效进行轨道不平顺性消缺,以提高轨道平顺性和线路运营水平,需寻找一种新的解决方法。本文通过深入研究惯导系统在航偏角与俯仰角方向的偏差误差,发现高精度惯导系统在缺乏CPⅡ、CPⅢ控制网约束情况下也能满足有砟铁路轨道不平顺性消缺;同时,采用双里程计设计,提高了里程测量精度,为大机捣固提供准确的里程基准。研究结论:(1)提出的既有线有砟铁路轨道不平顺
At high rotation numbers,the rotational effects on heat transfer and flow could be diverse among the channels with different blockage ratios.However,most studie
The gas-liquid two-phase flow patterns of a centrifugal pump during the self-priming process were investigated numerically and experimentally.The Euler-Euler mu
Gaps in compressors are generally unfavorable because they lead to energy loss.However,gaps on diffuser blades can broaden the operation range of a compressor.T
In order to avoid collision with the end wall of the casing when the guide vane rotates around its own rotating axis in a centrifugal compressor,a circular gap
In this study,mixed convection heat transfer and fluid flow is numerically investigated in an open system enclosure containing a heated obstacle.Effects of the
In this paper,the visualization of the thermo-hydrodynamic behavior in flat-plate pulsating heat pipe(FP-PHP)with HFE-347 is experimentally investigated.The FP-PHP is vertically placed with filling rate of 20%to 70%and heating power of 20 W to 140 W.A hig
The tip leakage flow in different axial gaps is numerically investigated based on the Reynolds-Averaged Navier-Stokes equations and k-ω SST turbulent model usi