《工业炉砌筑工程质量检验评定标准》GB50309-92(简称〈标准〉),将砌体砖缝厚度的检查方法和评定标准,列为共同规定中的“基本项目”。而且明确,各专门章节的筑炉工程应同时按照共同规定与各专门章节的特殊要求进行质量检验和评定。充分表明砌体砖缝厚度在筑炉工程施工质量中的重要性。一般工业炉墙、底部位,〈标准〉对砌体砖缝厚度检查数量与检查方法规定为:按规定的检查处数,在每处砌体的5m~2表面上用 “Industrial furnace masonry construction quality inspection assessment standards” GB50309-92 (referred to as “standard”), the masonry brick thickness of the inspection methods and assessment criteria, as a common rule in the “basic items.” Moreover, it is clear that the construction of special furnace sections should be subject to the quality inspection and assessment in accordance with the common requirements and the special requirements of the special sections at the same time. It fully shows the importance of masonry brick joint in the construction quality of construction furnace. General industrial furnace wall, the bottom of the standard brick masonry thickness of the inspection and inspection methods for the number of provisions: According to the provisions of the inspection at the number of masonry on each of the 5m ~ 2 surface