rheocasting相关论文
The microstructures of 7L201 alloy slurry prepared by near-liquidus electromagnetic casting (NLEMC), electromagnetic cas......
A novel one-step semisolid processing technique, the rheo-diecasting (RDC) process, was developed, which adapts in situ ......
Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasti
This article reports the effects of stirring speed and T6 heat treatment on the microstructure and mechanical properties......
The effects of ultrasonic vibration (UV) treatment on microstructure of semi-solid aluminum alloys and the application o......
Effect of original microstructures on microstructural evolution of A2017 semi-solid alloy billets du
The microstructural evolution of the A2017 semi-solid alloy billets provided with rheocasting and extruding/extending fo......
A water-cooled serpentine channel pouring process was invented to produce semi-solid A356 aluminum alloy slurry for rheo......
Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasti
This article reports the effects of stirring speed and T6 heat treatment on the microstructure and mechanical properties......
Semi-solid metal processing is being developed in die casting applications to give several cost benefits.To efficiently ......
In this paper, the effects of pouring temperature of magnesium melt, preheating temperature of the barrel of the screw m......
Microstructures and formation mechanism of hypoeutectic white cast iron by isothermal electromagneti
An investigation was made on the evolution of microstructures of hypoeutectic white cast iron slurry containing 2.5wt.%C......
The isothermal coarsening behavior of primary solid particles in A356 aluminum alloy semi-solid slurry produced by angul......
研究了半固态A356铝合金浆料的成形温度、压射比压和压射冲头速度对半固态A356铝合金流变压铸充填性的影响．实验结果表明：较高的半固......
利用保温电磁搅拌制备半固态浆料,对Al-6.5%Mg合金的半固态流变铸造进行研究。实验中对该合金的常压铸造、液态压铸和半固态压铸所......
采用自行设计的台阶板流变性能试件和半固态合金压铸模具，对A356合金的制浆．成形分离式流变压铸技术进行了试验研究。结果表明，选用适......
采用模拟软件对Al—Si合金半同态流变压铸的充型和凝固过程进行模拟，并与试验进行了对比结果表明，浇注温度为610℃、......
重要进步在理解和建模在最近的年里被取得了半固体金属的流变学。这些模型在材料反应上以水珠的尺寸和形态学显示出微观结构的效果......
与不同再热的温度， thixoformed A356 合金的 Pitting 行为被评估。线性打扫 voltammetric 测试被用来在 3.5% NaCl 答案学习 thixo......
本文建立了一种LB模型,用数值模拟的方法研究了ZL201铝合金预制体在固液混合流变铸造中的熔化和凝固过程。该模型主要模拟ZL201铝......
总结了30余年来半固态合金流变铸造的研究和应用现状.介绍了传统机械搅拌式流变铸造工艺,由于其所制备的半固态合金浆料保存、输送......
研究了剪切低温浇注式半固态浆料制备工艺(LSPSF)对Al-20Si过共晶合金中初生Si相尺寸和形貌的影响。结果表明,LSPSF工艺可制备质量......
研究了剪切低温浇注式半固态浆料制备工艺（LSPSF）对Al-20Si过共晶合金中初生Si相尺寸和形貌的影响。结果表明，LSPSF工艺可制备质量优......
以细化Al-18Si-xFe合金中强化相为目的,提出了一种波浪形倾倾斜板流变铸造（WSP）制备过共晶Al-18Si-xFe合金的方法,并对合金在波浪形......
