Preferred orientation of gold electroplating coating based on first-principle calculations

来源 :2013年全国博士生学术论坛——电子薄膜与集成器件 | 被引量 : 0次 | 上传用户:ttjjww1129
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  A self-synthetized gold salt with water-solubility is employed as the main salt in electroplating gold bath.The gold coating presents an obvious preferred (111) orientation detected by XRD, and the intensity of (200) peak is slightly stronger than that of (220) peak.The surface energy, atomic geometry and electronic structures of Au(111), (200) and (220) faces were calculated based on the first-principle within generalized gradient approximation.According to the calculation of surface energy, the structural stability of Au surfaces, which decreases in the following order: Au(111)
其他文献
编程成功率是阻变存储阵列可靠性的重要方面.本文采用1KblT1R阵列系统研究了晶体管的衬偏效应对Cu/HfO2/Pt阻变存储器编程成功率的影响.在forming过程中,晶体管和阻变存储器都具有一定的电压降,因此晶体管源漏两端端电压被抬高,晶体管产生衬偏效应,阈值电压增大.当晶体管的阈值电压大于所加栅压时,晶体管被截止,流经阻变存储器的电流被限制,无法被编程至低阻态.实验发现,将forming电压控
本文主要从材料的选取、器件的结构和工作机理等三部分展开讨论,并对有机单晶发光场效应晶体管存在的问题和未来进行了分析和展望。
本文基于600V体硅外延BCD工艺,完成了一款浮栅驱动芯片的设计.为了增强隔离结构的可靠性,本文提出了一种新型的P型阱、N型阱交替排列的隔离结构,该隔离结构耐压为740V,相对于传统结构增加了7%,当LDMOS漏端电位大于1V,且漏端与高侧电压差为15V时的漏电远小于lμA,满足芯片应用要求.此外,为了增强浮栅驱动电路的抗噪性能,提出了一种新型的抗dV/dt噪声电路,相比于使用滤波宽度为70ns滤
本文详细研究了绝缘体上硅横向绝缘栅双极型器件的热载流子退化机理.首先,通过对不同应力条件下器件的热载流子退化趋势和退化量的研究,发现横向绝缘栅双极型器件的最坏应力可以用结构和浓度分布相同的横向双扩散金属氧化物半导体管的峰值衬底电流来评估.对器件静态应力条件下的热载流子退化进行了实验,并借助软件仿真分析了器件的退化杌理,研究发现,器件的热载流子退化主要发生在鸟嘴区,鸟嘴区的热空穴注入主导了整个器件的
Novel reverse-conducting IGBT (RC-IGBT) with anti-parallel MOS controlled thyristor (MCT) is proposed.Its major feature is the introduction of an automatically controlled MCT at the anode, by which th
LiZnTi (Li0.43Zn0.27Ti0.13Fe2.17O4) ferrites doped with 0.35wt%-l.5wt% H3BO3-Bi2O3-SiO2-ZnO (BBSZ) were synthesized through low temperature ceramic sintering process.The grain growth of BBSZ doped LiZ
A novel simple surface modification route, i.e., solution deposition planarization (SDP), was firstly applied for the enhancement of the flux pinning in superconducting thin films.Solution-derived amo
We have successfully employed metal-organic chemical vapor deposition (MOCVD) to simultaneously deposit double-sided YBa2Cu3O7-δ (YBCO) films on both sides of Y2O3/YSZ/CeO2 (YYC) buffered biaxially te
Ni-Mn-Zn ferrite films were prepared on silicon substrate with CeO2/YSZ (YSZ:yttria-stabilized ZrO2) as buffer layer by pulsed laser deposition.The effects of CeO2/YSZ buffer layer and oxygen pressure
In this paper, core/shell-structured tetra-nitrophthalocyanine copper/titanium dioxide (TNCuPc-TiO2) hybrid particles were successfully synthesized through a facile solvothermal synthesis route.Its mo