【摘 要】
：
In view of high strength and poor impact toughness of the high-zinc magnesium alloys, the method of micro-alloying was adopted to improve the impact-toughness o
【机 构】
：
College of Materials Science and Engineering
论文部分内容阅读
In view of high strength and poor impact toughness of the high-zinc magnesium alloys, the method of micro-alloying was adopted to improve the impact-toughness of Mg-10Zn-5Al high zinc magnesium alloys by adjusting the addition of Sb. The results show that: the dystectic Mg3Sb2 particles formed by Sb and Mg are distributed in the front of dendrite, restrain the growth of the secondary phase and then change the morphology of the secondary phases, which refines the matrix in some extent and improves the impact-toughness of the alloy significantly. But with further increase of Sb addition, Mg3Sb2 particles congregate and form needle-like Mg3Sb2 phase, which dissevers the matrix and leads to the reduction of the strength and impact-toughness of the alloys. Hence, the mechanical prosperities of ZA105 high zinc magnesium alloy are significantly improved with appropriate Sb addition, which provides a new way to extend the application fields of high zinc magnesium alloy.
其他文献
The cross-sectional distortion usually appears during rotary-draw bending process of thin-walled rectangular tube with small bending radius. To study the cross-
Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.101.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of
Using solid-state synthesis method,a series of samples of lanthanum doped Li1-xLaxFePO4(x=0.0025,0.005,0.0075,0.01)were prepared.Each cathode structural and ele
In order to obtain the thermodynamic description of the Mg-Ga binary system, the thermodynamic assessment of the system was carried out using the CALPHAD method
The microstructure and properties of the 93W-4Ni-2Co-1Fe (mass fraction, %) tungsten heavy alloys prepared by mechanical alloying and electric current activated
With the development of aero-engine,gas import temperatures of hot section structural materials are increasingly higher.Metal alloy materials due to the rapidly
We investigated the transport properties of isoelectronic substitution of Yb by Ca for Zintl phase YbCd2Sb2 below 300 K.The p-type Yb1-xCaxCd2Sb2(0.2≤x≤0.8)sa
The β-SiC/SiO2 core-shell nanowires with the "stem-and-node" structure were synthesized in the presence of cerium oxide by the carbothermal reduction of the st
Single crystals of LaP3O9·3H2O were prepared using a classical method of aqueous chemistry whereas those of the ultraphosphate LaP5O14 were obtained by flux me
High cycle fatigue behavior of die cast AZ91D magnesium alloy with different Nd contents was investigated.Axial mechanical fatigue tests were conducted at the s