ProcessingMap相关论文
在温度为900~1100℃、应变速率为0.001~1 s-1的变形条件下,利用Gleeble热模拟试验机研究了粉末冶金工艺制备的新型高钨合金钢的热变......
采用Gleeble-3800热模拟试验机对含铜304L不锈钢进行热压缩实验,变形温度为900~1150℃,应变速率为0.01~20 s-1,并通过应力-应变曲线......
The aim of this study is to develop processing maps based on two models and compare them with con-ventional processing m......
Controlling Flow Instability in Straight Spur Gear Forging Using Numerical Simulation and Response S
Workability domain without the onset of flow instability was developed by numerical simulation and response surface meth......
Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon
A CoCrFeMnNi high-entropy alloy with a high content of carbon was synthesized,and its hot deformation behavior was studi......
Hot Deformation Behavior and Processing Maps of 0.3C-15Cr-1Mo-0.5N High Nitrogen Martensitic Stainle
Hot deformation behavior of 0.3C-15Cr-1Mo-0.5N high nitrogen martensitic stainless steel (HNMSS) was investigated in the......
The hot deformation behavior and processing map of Cu-bearing 2205 duplex stainless steel (2205-Cu DSS) were investigate......
...
Hot Deformation Behavior and Workability of (SiCp + Mg2B2O5w)/6061 Al Hybrid and SiCp/6061 Al Compos
...
Hot compression tests of low carbon steel were carried out on Gleeble-3500 system in the temperature range from 750 to 9......
Hot compression tests on AZ40 magnesium alloy were conducted on a Gleeble 1500d hot simulation testing machine in a defo......
...
The deformation behaviors of China Low Activation Martensitic(CLAM)steel were investigated by the thermal simulation com......
Characterization of hot workability of extruded ZK60, AZ61 and AZ80 magnesium alloys using 3-D proce
...
Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic s
Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800......
Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic s
Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800......
The hot deformation behavior of Al-Cu-Li alloy was investigated by hot compression tests in the temperature range of 340......
Fracture Behavior and Processing Deformation of C71500 Cupronickel Alloy during Hot Tensile Deformat
The hot tensile deformation properties and microstructure evolution of high purity C71500 cupronickel alloy at 1023-1273......
Microstructure evolution and hot deformation behavior of carbon nanotube reinforced 2009Al composite
The hot deformation behaviors of the bimodal carbon nanotube reinforced 2009Al(CNT/2009Al)com-posite were studied by est......
应用以动态材料模型为基础的ProcessingMap研究了D2钢在变形温度900~1160℃、变形速率0.01~10.00s-1区间的动态应变时效规律。结果表明,D2钢在变形温度为1120~1150℃、变形速率为0.01s-1条件......