论文部分内容阅读
近年来,采用硫磺胶泥接桩工艺取代电焊接桩的基础工程日益增多。为此,我们研制了硫磺胶泥电热式搅拌罐,经使用,效果良好。现简介如下: 1 主要技术参数胶泥容量(kg) 130 搅拌速度(r/min) 14 加热时间(min)(油温170℃,100kg胶泥) 40 功率(kW) 电机(搅拌用) 2.2 电热器(加热用) 24 生产率(kg/h) 200 2 结构特点硫磺胶泥电热式搅拌罐的构造如图1所示。其主要特点如下: 2.1 热器及其布置该装置采用8只3kW的管状电热器作为热源。加热器呈网状分布,这样布置,升温较
In recent years, there has been an increase in the number of basic projects that replace the welded piles with sulfur cement. For this purpose, we have developed a sulphur-rubbed electric stirring tank, which has been used with good results. The brief introduction is as follows: 1 Main technical parameters Cement capacity (kg) 130 Stirring speed (r/min) 14 Heating time (min) (oil temperature 170°C, 100kg cement) 40 Power (kW) Motor (for stirring) 2.2 Electric heater ( Heating) 24 Productivity (kg/h) 200 2 Structural characteristics The structure of the sulfur cement mortar type electric agitating tank is shown in Fig.1. The main features are as follows: 2.1 Heater and its arrangement The device uses 8 3kW tubular heaters as the heat source. The heaters are distributed in a mesh, so the arrangement is warmer than