楼板缝浇灌细石混凝土,一般都是支模,既费工又费料。吊模比支模好,不仅省工省料,而且底面容易找平。目前,我们单位采用的吊模有两种:一种是角钢吊模(图1),一种是板条吊模(图2)。角钢吊模在楼板底面板缝间形成一个凹槽,拆模后用砂浆填平。这样做虽然多了一道人工填 The floor slabs are watered and covered with fine-grained concrete, which is generally a mold, which is both laborious and wasteful. Hanging mold is better than mold, not only saving labor and materials, but also easy to level the bottom. At present, there are two types of hanging dies used by our company: one is the angle hanging dies (Figure 1) and the other is the slat hanging dies (Figure 2). The angle hanging mold forms a groove between the bottom panel seams of the floor and is filled with mortar after the mold is removed. Although there is one more manual filling