二十、采用两个气缸向高处输送工件的装置1、机构概述本装置用一个气缸将工件举到高处后,再由另一个气缸将工件推出(见图20a),被推出的工件沿斜面自动地送至下一道工序。通常使用的气缸多为双作用的,但对本装置只在气缸活塞杆上升时才加载,而在下降时是空行程,用很小的力即可动作,所以采用差动气缸。 Twenty, the use of two cylinders to convey the workpiece height device 1, the organization outlined This device uses a cylinder to lift the workpiece to a height, then the other cylinder will push the workpiece (see Figure 20a), the workpiece is being pushed along Bevel automatically sent to the next process. Commonly used cylinders are mostly double-acting, but the device is only loaded when the cylinder piston rod is up, and when it is down is the empty stroke, with a small force to move, so the use of differential cylinders.