论文部分内容阅读
在制作仿真模型吋,发挥自己的聪明才智,对模型进行一些改造,做出与组件不完全相同的模型来,也是制作模型的乐趣之一。各人对模型改造的目的不同,我认为最重要的是提高模型的仿真程度。这里举几个改造的方法和例子供人家参考。 (1)战车模型中天线底座都为塑料仿制的假弹簧,仿真差的就是一根短塑料棍。改造吋,我用一次性打火机中的小弹簧代替原部件,并在弹簧上端接上打火机喷气口上的铜管(1-2mm长),再粘上用拉长塑料捧制成的天线,天线顶端的小圆球,可将香火靠近塑料棒顶端,使之受热熔成球状,改造后,天线可像实物那样倒下且不易折断。 (2)由于各种原因,实物中一些活动部分模型中
In the production of simulation model inch, to play their own ingenuity, make some modifications to the model, to make the model is not exactly the same components, but also one of the fun making models. The purpose of each model is different from each other, I think the most important is to improve the simulation of the model. Here are some ways and examples of transformation for others reference. (1) tank model antenna base are plastic imitation of the fake spring, poor simulation is a short plastic stick. In retrofitting, I replace the original part with a small spring in a disposable lighters and connect the brass tube (1-2mm long) on the air jet of the lighters to the upper end of the spring, and then attach the antenna made of an elongated plastic to the top of the antenna The small ball, incense can be close to the top of the plastic rod, so that the hot melt into a ball, after the transformation, the antenna can fall like a real and not easy to break. (2) For a variety of reasons, some of the active part of the model