磁脉冲压力加工技术是美国于1966年发明的.苏联于1970年首先应用了这一技术。本文介绍以下几个方面:一、磁脉冲压力加工原理;二、利用脉冲磁场能量的工艺方法;三、电磁脉冲压力加工实例;四、电磁脉冲压力加工设备的主要部件;五、苏联研制的电磁脉冲压力加工设备。一、磁脉冲压力加工原理磁脉冲压力加工的原理是利用磁脉冲装置,使电容器组通过套有或附近装有坯料的 Magnetic pulse compression machining was invented by the United States in 1966. The Soviet Union first applied this technique in 1970. This article describes the following aspects: First, the principle of magnetic pulse pressure processing; Second, the use of pulsed magnetic field energy process; Third, the case of electromagnetic pulse pressure processing; Fourth, the main components of the electromagnetic pulse pressure processing equipment; Pulse pressure processing equipment. First, the principle of magnetic pulse pressure processing Magnetic pulse pressure processing principle is the use of magnetic pulse device, the capacitor group through the sleeve with or near the blank