Soil flushing technology is an’in situ’remediation technique involving the injection of a liquid solution.Applications of the soil flushing technique depend on the leachability of the pollutants and the environmental compatibility and total volumes of the solutions used.Therefore,experiments should consider these aspects by simulating the real phenomenon and using the most suitable reagents for the leachability of the different mineralogical forms present.Thirty-one laboratory tests were carried out (in batch and becker) to the complete exhaustion of the leaching capacity according to pH measurements.The reaction kinetics were studied by producing more than 300 solution samples during which the principal heavy metal concentrations,pH and Eh were measured.Leaching solutions containing various concentrations of hydrochloric,sulphuric,nitric and acetic acids were used.Mercury was leached using potassium iodide and acetic acid (pH 2).Analytes such as arsenic,cadmium,mercury,lead,selenium and zinc proved to be leachable in the investigated soil layer.However,high removal efficiencies could be obtained using different typological solutions,concentrations and volumes.The paper discusses the applicability of the soil flushing technique for different heavy metal contents and pH conditions of the flushing solution.