论文部分内容阅读
1.原木准备 做灵芝用的树种选用壳 斗科树种为主,其它如枫、杜仲、苦楝、乌桕 等也可用。砍代时间为11月下旬至翌年3 月中旬。一般砍代后6-15天将木材截 为25厘米长段,原木含水量掌握在33％- 48％之间。再将短段木每2段装入低压聚 乙烯塑料袋内,直径小于10厘米的段木, 应先用竹条捆扎,捆扎时,段面一定要平 整。不能刺破塑料袋。 2.灭菌 塑料袋置于常压锅中保持 100℃灭菌8-12小时,若用高压锅,需要 115℃下保压2小时取出。放置时,袋与袋 之间要留有空隙,如果袋内有积水,要在灭 菌后及时将积水倒出。
1. Logs used to make Ganoderma lucidum tree species used Fagaceae mainly, such as maple, Eucommia, Melia, blackflies, etc. are also available. Cut off from late November to mid March next year. General chopped generation 6-15 days after the timber cut into 25 cm long section, the wood moisture content between 33% - 48%. Then short sections of wood every 2 paragraphs into the low-pressure polyethylene plastic bags, the diameter of less than 10 cm section of the wood, should be first used bamboo strapping, strapping, the section must be smooth. Can not puncture plastic bags. 2. sterilized plastic bag placed in a pressure cooker to maintain sterilization at 100 ℃ 8-12 hours, if the pressure cooker, need to hold at 115 ℃ for 2 hours to remove. When placed, leave a gap between the bag and the bag, if the bag has water, to be in a timely manner after sterilization poured water.