论文部分内容阅读
1975年初,我段在某工程酸库施工,采用水玻璃耐酸砂浆粉抹墙裙,通过两年多的运转使用,情况良好。该工程墙裙施工是在水泥基层上作环氧树脂涂料隔层(先刷稀底,后刷稠面),随即撒石英砂粗糙面,待环氧树脂干固后,用水玻璃砂浆嵌分格玻璃条,最后粉水玻璃砂浆一底、一面共2厘米厚。现将施工中几点体会简述如下。一、关于环氧树脂涂料隔层及石英砂粗糙面第一度环氧树脂涂料要稀,作打底用,第二度环氧树脂涂料要稠,以便粘吻石英砂。第
At the beginning of 1975, my section was constructed in a certain acid pool, using water glass and acid-resistant mortar powder to wipe the wall skirts. It was in good condition after more than two years of operation. The construction of the project is to make epoxy resin coating on the cement base layer (first brush the thin end and then brush the thick surface), then sprinkle the rough surface of quartz sand, after the epoxy resin is dried, the water glass mortar embedded grid glass Article, the last powder glass mortar bottom, a total of 2 cm thick. Now I will briefly describe some of the experiences in construction. First, on the epoxy resin coating barrier and quartz sand rough surface of the first degree epoxy resin coating to be thin, for the primer, the second degree epoxy resin coating to be thick, in order to kiss quartz sand. The first