论文部分内容阅读
本文介绍了一台研制的钕玻璃固体激光加工机。其主要特点为:1.脉冲出光单次可达100焦耳,重复频率出光额定输出35焦耳。重复频率最大为每秒2次,35焦耳时为1次/6秒。脉宽最大为6ms,连续可调。脉冲出光可自动计数。计数值最大为999次。2.光学系统采用加工,观察和投影光路统一。加工光路有变焦系统,使得在非焦点处加工时仍可同时观察加工过程。采用双目目镜观察和投影屏观察两种方式。可在加工过程中测
This article describes a developed neodymium glass solid laser processing machine. Its main features are: 1. Pulsed light up to 100 joules single, repetitive frequency light output rated 35 joules. The maximum repetition frequency is 2 times per second and 35 joules is 1 time / 6 seconds. Pulse width up to 6ms, continuously adjustable. Pulsed light can be automatically counted. The maximum count is 999 times. 2. Optical system using processing, observation and projection of light uniform. Processing optical path zoom system, making non-focal processing can still observe the processing. Eyepiece with binocular observation and projection screen to observe two ways. Can be measured during processing