论文部分内容阅读
该机是应用外槽轮式排种原理,由东风—2S插秧机(3马力)牵引和传动。插秧机的牵引机构不需任何改动,如需插秧时,可将牵引架与直播机底板支座的销钉卸去。再与插秧机构连接。该机播种部分由底板、传动箱、种子箱、排种盒等组成(见图)。排种轴是由插秧机主传动箱经传动轴、播种机传动箱带动。传动箱内由一对蜗轮蜗杆组成,其传动比为30:1。蜗轮轴心为方孔,与左右两根排种轴一端的方轴滑动配合。蜗轮带动排种轴转动,种子从排种轮上面排出,经过用镀锌钢板制作的输种盒均匀地撒落在起垄带中。种子箱与排种盒分两组在底板上左右排列,每组8行,共有16行。种箱尺寸1260×295×270毫米,由薄板构成,排种盒内装有排
The machine is the application of outer wheel wheeled seeding principle, the DF-2S transplanter (3 hp) traction and transmission. The tractor traction mechanism without any changes, if you need transplanting, the tractor and the drill can be removed from the base plate bearing. Then with the transplanting agencies. Seeding part of the aircraft from the floor, gear box, seed boxes, seed boxes and other components (see photo). The seed shaft is transplanted from the main drive box of the transplanter through the drive shaft and the seeder drive box. Gearbox consists of a pair of worm gear, the transmission ratio of 30: 1. The worm shaft center is a square hole, which is matched with a square shaft on one end of two seed metering shafts. The worm wheel drives the seed shaft to rotate, seeds are discharged from the seed wheel, and the seed box made of galvanized steel is uniformly sprinkled on the ridge. Seed boxes and seed boxes in two groups arranged on the left and right on the floor, each group of 8 lines, a total of 16 lines. Seed box size 1260 × 295 × 270 mm, formed by the thin plate, the row of seed boxes equipped with rows