为了减轻劳动强度和节省人员,我们在150公斤空气锤上搞了一个机械化甩子,使用起来效果很好。现介绍如下,供大家参考。其结构如图1所示。在下砧头上用螺栓9固定两块夹板8,其中一块夹板上焊有带方孔的底座7(如图1)。将甩子1的扶手用螺钉固定在 In order to reduce labor intensity and save people, we engaged in a mechanical killer 150 kg air hammer, the effect is very good. Now introduced as follows, for your reference. The structure shown in Figure 1. On the lower anvil head, two clamps 8 are fixed by bolts 9, one of which is welded with a base 7 with a square hole (as shown in FIG. 1). Hold the Armrest of Knockout 1 with screws