在现浇钢筋混凝土施工中,柱与砖墙连接一般采取在柱上预留插筋连接。用定型钢模板施工时,柱上预留插筋一般采用两种做法:(1)在柱上预埋铁板,待浇筑混凝土、拆除模板后,将插铁焊在铁板上。(2)在柱内按规定预埋插筋、浇筑混凝土、拆除模板后,安排石工将预埋插筋凿出。这两种施工方法相 In cast-in-place reinforced concrete construction, the connection between the column and the brick wall generally adopts the connection of reserved bars on the column. When using the fixed steel formwork construction, there are generally two methods for inserting steel bars on the column: (1) The iron plate is embedded on the column. After the concrete is poured and the template is removed, the inserting iron is welded on the iron plate. (2) After inserting ribs, pouring concrete, and removing the formwork in accordance with regulations, the masonry shall be arranged to cut out the pre-embedded reinforcements. The two construction methods