论文部分内容阅读
The pressure profiles, gas velocities, solid circulation rate, solids flux, residence time distribution of gas and particles in chemical-looping combustion reactors and gas leakage were studied in a cold flow model unit. And these parameters in both air and fuel reactors were measured in the experimental stage. The experimental results show that gas fluidization velocity in the air reactor is 1.8 m/s, gas fluidization velocity in the fuel reactor 0.5 m/s, and the bed materials inventory of the two reactors between 1.2 to 3.15 kg. The first cold flow model results show that the solid circulation rates are sufficient. The appropriate operating conditions are optimized and the summary of final changes is made the on cold model. The proposed design solutions are currently being verified in a cold flow model simulating the actual reactor(hot) system. This paper presents an overview of the research performed on a cold flow model and highlights the current status of the technology.
The pressure profiles, gas velocities, solid circulation rate, solids flux, residence time distribution of gas and particles in chemical-looping combustion reactors and gas leakage were studied in a cold flow model unit. And these parameters in both air and fuel reactors were measured in the experimental stage. The experimental results show that gas fluidization velocity in the air reactor is 1.8 m / s, gas fluidization velocity in the fuel reactor 0.5 m / s, and the bed materials inventory of the two reactors between 1.2 and 3.15 kg. The first cold flow pattern results show that the solid circulation rate are sufficient. The appropriate operating conditions are optimized and the summary of final changes is made on on cold model. The proposed design solutions are currently being verified in a cold flow model simulating the actual reactor (hot) system. This paper presents an overview of the research performed on a cold flow model and highlights the current status of the technology.