晶振在电器中损坏频率较高,有些特殊晶振又无配件。本人一律采用修复法(除金属壳晶振外)拆下晶振,用木工夹板刀,小心从侧面切开晶振,会发现有一晶片,把它放在无水酒精中清洗,把晶片夹也清洗一下,同时把晶片夹微微向上撬一下。再装上晶片和侧面 Crystal in the electrical damage higher frequency, some special crystal and no accessories. I will use the repair method (except the metal shell crystal) Remove the crystal, with a wooden plywood knife, carefully cut the crystal from the side, you will find a chip, put it in anhydrous alcohol to clean, the chip holder is also cleaned, At the same time the wafer clip slightly pry up. Re-install the chip and the side