论文部分内容阅读
在莫斯科铁路局乌兹罗夫机务段,人们按照示功图对ТЭ10型内燃机车的10Д100型柴油机进行技术诊断和检测。在水阻试验时对每个气缸通过选样检测的方式得到示功图。气缸内使用的是工业上批量生产的压力测量传感器,其用来测量随时间快速变化的压力(即沿曲轴转角的压力变化),测压范围为0～16MPa,精度等级为1.0。在示功阀开启情况下,传感器的工作范围为极限温度500℃以下,工作时间为15分钟,这么长的储备时间足够多次测量和整理示功图。传感器不需冷却,从而保证迅速、便捷地安装到10Д100型柴油机气缸的示功阀上以代替爆发压力计。这些传感器是专门绘制柴油机示功图而准备的。
At the Uzrovo depot of the Moscow Railway Administration, people conducted technical diagnoses and inspections of the 10Д 100 diesel engine of the ТЭ 10 diesel locomotive in accordance with a pictogram. In the water resistance test for each cylinder through the sample test to get the dynamometer. Cylinders are used in the industry for mass production of pressure measurement sensors, which measure the rapidly changing pressure over time (ie pressure changes along the crank angle), with a pressure range of 0-16 MPa and an accuracy rating of 1.0. When the valve is open, the working range of the sensor is below the limit temperature of 500 ° C and the working time is 15 minutes. Such a long time for storage sufficiently measures and organizes the dynamometer. The sensor does not need to be cooled in order to ensure quick and easy installation on the pilot valve of a 10Д 100 diesel cylinder instead of an outburst manometer. These sensors are specially prepared for the diesel engine dynamometer.