论文部分内容阅读
易熔合金铸型采用此工艺制造铸型与传统的工艺相比节省时间和资金70％～80％。此类铸型主要用于塑料的再处理,聚氨基甲酸泡沫塑料和复合脂类零件的生产,真空拉深,小批量压铸生产。此工艺亦适用于铸型样件生产,如生产上、下压模共需5～8小时。这种压模用于聚氨基甲酸乙脂的加工和真空成型,其使用寿命可达1～10万件。用MCT易熔合金制成的深拉延模寿命100～300件。如将压模重载荷部位用钢件加以强化,其寿命可达1000件。另一个优点是,压模重熔几乎无损失。易熔合金深拉延模可拉深厚度1.5mm的不锈钢板、2.5～3mm
Fusible alloy casting mold using this process compared to the traditional process saves time and money 70% to 80%. Such mold is mainly used for plastic reprocessing, polyurethane foam and composite parts production, vacuum drawing, small batch die-casting production. This process is also applicable to the production of mold samples, such as the production of the next press a total of 5 to 8 hours. This stamper is used in the processing and vacuum forming of polyurethane, with a service life of 1 to 100,000 pieces. Deep drawing dies made of MCT fusible alloy have a life of 100 to 300 pieces. If the die heavy load parts to be strengthened with steel, its life expectancy up to 1000 pieces. Another advantage is that the stamper melts almost without any loss. Fusible alloy deep drawing die can be drawn 1.5mm thick stainless steel plate, 2.5 ~ 3mm