论文部分内容阅读
某产品插座的技术要求为:(1)插座应进行水压试验,要求在30个大气压下保持2小时,45个大气压下保持15分钟不漏水;(2)心棒和外壳之间的绝缘电阻应不小于10兆欧。为满足上述要求,做了大量的实验工作,并已批量生产,现介绍如下:十、材料的选择根据上述密封插座的要求所选用的材料应能够牢固的和心棒与外壳粘合,而绝缘性能应达到产品要求。密封插座其结构如下图所示:
The technical requirements of a product socket: (1) The socket should be subjected to hydrostatic test, requiring 30 hours to maintain atmospheric pressure for 2 hours, 45 atmospheric pressure for 15 minutes without water leakage; (2) between the mandrel and the shell insulation resistance should Not less than 10 megohms. In order to meet the above requirements, a great deal of experimentation has been done and mass production has been introduced as follows: X. Material Selection According to the requirements of the above sealed sockets, the material selected should be firm and the core sticks to the shell while the insulation performance Should meet the product requirements. Seal socket structure as shown below: