轴承拉具是拉卸圆锥滚子轴承的专用工具,由外箍5、卡箍4、小轴3、拉杆1(见附图)组成。卡箍加工后沿中心线锯开成两半;考虑到个别花键轴花键部分的外径相同于轴承内圈外径尺寸,因此,卡箍内孔应加工成花键套的形式,使卡箍抓轴承内圈更牢固些。 Bearing pull taper taper roller bearing is a dedicated tool, the outer hoop 5, clamp 4, a small shaft 3, rod 1 (see photo) composition. Hoop processing along the center line sawing in half; taking into account the individual spline shaft spline part of the same outer diameter of the inner diameter of the bearing, so the hoop bore should be processed into a spline sleeve in the form of Clamp to grab the bearing inner ring more solid.