日本小松制作所研制出连续监视机床切削加工状态,并能直接测出刀尖微小崩刃和磨损的装置,名为“刀具故障监视装置”,现已开始出售。在这以前,作为机械加工中心或数控机床的附件,检测刀具故障的装置已经研制出来,但此种装置检测出故障后,仅限于发出警报,停机待查;而小松制作所新研制的装置,不仅能检测出0.5mm左右的徽小崩刃或磨损,而且能即刻停止加工,发出使刀具退回及自动复位的指令,具有使其恢复正常加工状态的功能。刀具自动复位技术的实际应用,被认为是给工厂实现无人化带来了佳音。小松 Komatsu has developed a continuous monitoring of machine tool cutting state, and can directly measure the tip sharp chipping and wear device, called “tool fault monitoring device,” has now begun to sell. Prior to this, as a machining center or CNC machine tool attachment, the tool to detect tool failure has been developed, but such devices detect faults, the alarm is only limited to stop pending investigation; and Koizumi’s newly developed device, Not only can detect about 0.5mm small chunky chipping or wear, but also immediately stop processing, issued a tool to return and automatic reset command, with its return to normal processing state function. The practical application of the tool automatic reset technique is believed to bring good news to the unmanned plant. Komatsu